Production Flexer
Bullseye Glass Co.
Bullseye Glass Co.
Portland, OR Portland, OR Full-time Full-time From $19.
07 an hour From $19.
07 an hour TEKTA (5 - 8 HOURS/DAY) Lines of Responsibility Reports to:
Tekta Lead; Floor Manager Supervises:
N/A Essential Job Functions Set up rollers on forming table.
Cast single color glass out of the furnace.
Cast glass for all sheet glass styles.
Cast consistent sized sheets.
Trim excess glass from ladle.
Spread molten glass on forming table.
Load sheets of glass into the lehr.
Maneuver Tekta buggy to move ladle from furnace to mill and cooling trough.
Monitor and adjust furnace controls.
Be capable of setting up all equipment used in the Production area.
Understand and be able to react to equipment problems.
Understand and be able to react to quality problems arising at the hot end.
Have a thorough knowledge of the Casting functions to train new employees.
Other Job Functions Understand the variables of casting temperature, furnace pressure and atmosphere.
Stir the furnace.
Knife the sheet to release it from the receiving table.
Able to make lehr temperature changes.
May assist in draining of tank.
General clean-up of factory work area.
FRIT (0-3 HOURS/DAY) Lines of Responsibility Reports to:
Assembled Goods Supervisor; Floor Manager Supervises:
N/A Essential Job Functions Data entry on the frit database and accurately Pull all the feedstock for the upcoming crushes based on the bi-weekly schedule Complete paperwork neatly and completely; Read QC databases to verify what was pulled Put away and organize the incoming feed stock(tips/tails/sheets/cullet) Operate stand up forklift Daily housekeeping Glass cutting Other Job Functions Receive and store all of the incoming packaging materials for frit:
jars, boxes, lids, buckets Organize or reorganize the frit bulk on the warehouse racking Requisites (Education, Training, Experience, Skills) Must be a good listener and have the ability to follow verbal and written instructions.
Ability to work in a team environment is essential.
Ability to follow safety procedures.
Must be able to lift up to 80 lbs.
Perform basic math calculations (daily):
inventories, crush analysis for pulling raw material; Self motivated Good communication skills Keyboarding/computer skills Team player Forklift experience preferred Attention to detail Work with minimal supervision Legible handwriting Strong organizational skills Good time management and prioritizing Good spatial ability Training Period One Year.
Physical requirements / Use of Senses Standing/walking:
Frequently.
To move throughout the factory to the various assigned work stations.
Lifting/carrying:
Frequently.
Lifting molten glass in a ladle from the furnace to the forming mill.
Typical weight lifted between 10 lbs.
and 80 lbs.
Handling/grasping:
Frequently.
Grasping the ladle to dip into in the furnace.
Grasping spreading bar to spread molten glass on forming table.
Lift buckets.
Cut glass.
Speaking/hearing:
Frequently.
To speak with employees and supervisors.
To be able follow verbal instructions and ask questions.
Finger dexterity:
Frequently.
Grasping spreading bar to spread molten glass on forming table and operating hand driven roller on forming table.
To grasp the Tekta buggy handle and ladle.
Using shears to trim excess glass from ladle.
To grasp push rod for loading sheets.
To operate controls for the rolling mill.
Data entry.
Near vision:
Frequently.
Casting glass out of the furnace, using the spreading bar to spread glass on the forming table.
Loading sheets into the lehr and for trimming excess glass from ladle.
Look at computer screen.
Filling out paperwork.
Far vision:
Frequently.
For maneuvering about the facility.
Mental requirements / Attributes Interaction with others:
Frequently.
Communicates with co-workers and supervisors.
Time/deadline/shift/overtime requirement:
Occasionally.
May be required to work overtime as the need arises.
Attention to detail:
Frequently.
Accuracy is critical for almost all phases of the job.
Must be able to do simple math.
Critical judgment:
Frequently.
May need to identify problems or assess situations quickly and be able to determine needed action.
Positive attitude:
Continually.
Essential while working in a manufacturing environment with time stressors and working closely with co-workers.
Operation of Equipment / Tools Casting ladle:
Frequently.
To cast glass out of the furnace to the forming mill.
Loading push stick:
Frequently.
To move sheet from mill to lehr.
Spreading Bar:
Frequently.
To spread molten glass on forming table.
Shears:
Frequently.
To remove excess glass from ladle.
Knife.
Occasionally.
Move knife under the sheet to release it from the mill.
Forklift.
Frequently to move about the Frit warehouse pulling stock and putting stock away.
Job Type:
Full-time Pay:
From $19.
07 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Life insurance Paid time off Parental leave Referral program Retirement plan Schedule:
8 hour shift Day shift Monday to Friday Supplemental pay types:
Bonus pay COVID-19 considerations:
All customers and employees are required to wear a mask at all times; social distancing and proof of vaccination requested.
Education:
High school or equivalent (Preferred) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
Bullseye Glass Co.
Portland, OR Portland, OR Full-time Full-time From $19.
07 an hour From $19.
07 an hour TEKTA (5 - 8 HOURS/DAY) Lines of Responsibility Reports to:
Tekta Lead; Floor Manager Supervises:
N/A Essential Job Functions Set up rollers on forming table.
Cast single color glass out of the furnace.
Cast glass for all sheet glass styles.
Cast consistent sized sheets.
Trim excess glass from ladle.
Spread molten glass on forming table.
Load sheets of glass into the lehr.
Maneuver Tekta buggy to move ladle from furnace to mill and cooling trough.
Monitor and adjust furnace controls.
Be capable of setting up all equipment used in the Production area.
Understand and be able to react to equipment problems.
Understand and be able to react to quality problems arising at the hot end.
Have a thorough knowledge of the Casting functions to train new employees.
Other Job Functions Understand the variables of casting temperature, furnace pressure and atmosphere.
Stir the furnace.
Knife the sheet to release it from the receiving table.
Able to make lehr temperature changes.
May assist in draining of tank.
General clean-up of factory work area.
FRIT (0-3 HOURS/DAY) Lines of Responsibility Reports to:
Assembled Goods Supervisor; Floor Manager Supervises:
N/A Essential Job Functions Data entry on the frit database and accurately Pull all the feedstock for the upcoming crushes based on the bi-weekly schedule Complete paperwork neatly and completely; Read QC databases to verify what was pulled Put away and organize the incoming feed stock(tips/tails/sheets/cullet) Operate stand up forklift Daily housekeeping Glass cutting Other Job Functions Receive and store all of the incoming packaging materials for frit:
jars, boxes, lids, buckets Organize or reorganize the frit bulk on the warehouse racking Requisites (Education, Training, Experience, Skills) Must be a good listener and have the ability to follow verbal and written instructions.
Ability to work in a team environment is essential.
Ability to follow safety procedures.
Must be able to lift up to 80 lbs.
Perform basic math calculations (daily):
inventories, crush analysis for pulling raw material; Self motivated Good communication skills Keyboarding/computer skills Team player Forklift experience preferred Attention to detail Work with minimal supervision Legible handwriting Strong organizational skills Good time management and prioritizing Good spatial ability Training Period One Year.
Physical requirements / Use of Senses Standing/walking:
Frequently.
To move throughout the factory to the various assigned work stations.
Lifting/carrying:
Frequently.
Lifting molten glass in a ladle from the furnace to the forming mill.
Typical weight lifted between 10 lbs.
and 80 lbs.
Handling/grasping:
Frequently.
Grasping the ladle to dip into in the furnace.
Grasping spreading bar to spread molten glass on forming table.
Lift buckets.
Cut glass.
Speaking/hearing:
Frequently.
To speak with employees and supervisors.
To be able follow verbal instructions and ask questions.
Finger dexterity:
Frequently.
Grasping spreading bar to spread molten glass on forming table and operating hand driven roller on forming table.
To grasp the Tekta buggy handle and ladle.
Using shears to trim excess glass from ladle.
To grasp push rod for loading sheets.
To operate controls for the rolling mill.
Data entry.
Near vision:
Frequently.
Casting glass out of the furnace, using the spreading bar to spread glass on the forming table.
Loading sheets into the lehr and for trimming excess glass from ladle.
Look at computer screen.
Filling out paperwork.
Far vision:
Frequently.
For maneuvering about the facility.
Mental requirements / Attributes Interaction with others:
Frequently.
Communicates with co-workers and supervisors.
Time/deadline/shift/overtime requirement:
Occasionally.
May be required to work overtime as the need arises.
Attention to detail:
Frequently.
Accuracy is critical for almost all phases of the job.
Must be able to do simple math.
Critical judgment:
Frequently.
May need to identify problems or assess situations quickly and be able to determine needed action.
Positive attitude:
Continually.
Essential while working in a manufacturing environment with time stressors and working closely with co-workers.
Operation of Equipment / Tools Casting ladle:
Frequently.
To cast glass out of the furnace to the forming mill.
Loading push stick:
Frequently.
To move sheet from mill to lehr.
Spreading Bar:
Frequently.
To spread molten glass on forming table.
Shears:
Frequently.
To remove excess glass from ladle.
Knife.
Occasionally.
Move knife under the sheet to release it from the mill.
Forklift.
Frequently to move about the Frit warehouse pulling stock and putting stock away.
Job Type:
Full-time Pay:
From $19.
07 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Life insurance Paid time off Parental leave Referral program Retirement plan Schedule:
8 hour shift Day shift Monday to Friday Supplemental pay types:
Bonus pay COVID-19 considerations:
All customers and employees are required to wear a mask at all times; social distancing and proof of vaccination requested.
Education:
High school or equivalent (Preferred) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
